Epoxy Gloss Coat 120 KIT

$82.50$675.00 Inc GST

SKU: N/A Categories: , , Tag:


Epoxy Gloss Coat 120 is a low viscosity ultra-clear epoxy resin designed for use as a clear high gloss coating on various applications such as timber tabletops, timber surfaces, photographs, resin art and many others.

Epoxy Gloss Coat 120 has excellent air release properties, low VOC’s and an easy 2:1 mix ratio. Epoxy Gloss Coat 120 has been specially designed to not need heat applied to remove air bubbles from the surface coat, heat can be applied if you wish

Epoxy  Gloss Coat Resin is a high quality clear epoxy resin ideal for a mass of different applications from fibre laminates, wood saturation, glue powders, resin art, timber coatings, river tables, castings the options are endless. Manufactured right here in our Australian production plant you can be sure the quality is perfect every time.


Gloss Coat  can also be used as a standard laminating resin in any general purpose or marine laminating applications, with excellent water and corrosion resistance properties, easy wet out of fibre’s and long workable pot life.

Please note Gloss Coat  is not UV stable in outdoor direct sun environments, 


Mixing Directions

  • Resin should be mixed in a clean plastic disposable container or measuring jug. Resin should be measured by volume only. It is very important to accurately measure resin and hardener for optimum performance.
  • Ideal resin temperature is 18-25°c or room temperature. Resin temperature outside of this will have a change in pot life and working time.
  • Mix in the following ratio, 2 Parts A : 1 Part B. (Part A : Part B).
  • Resin pot life will be approx. 120-180  mins when mixed at a 2:1 ratio. *
  • Use a syringe or  measuring cup to measure hardener accurately, add to measured resin and mix slowly, ensuring not to create excessive air entrapment. Mix for approx. 30 seconds, ensuring to scrape bottom and edges of the mixing container. A good rule of thumb for mixing epoxy is to keep mixing epoxy until the cloudiness of the hardener disappears and this means the part A and part B have been blended well together.
  • Epoxy resins a suspectable to amine blush at times, amine blush is an oil like film that appears on the resin surface once cured, and this is due to excessive moisture in the air, to minimize the amount of blush that may appear on the resin surface ensure you choose a low humidity day or environment this will aid in reducing the blush. In the event that blush occurs light wet sand and polish can improve the surface finish.

General Safety Directions

  • Always consult the Safety Data Sheet (SDS). Available upon request.
  • Use in a well ventilated area.
  • Wear the following PPE safety equipment; disposable gloves, face mask, safety glasses.
  • If resin or hardener comes into contact with skin or clothing. Remove contaminated clothing and wash skin with cool water. If any further symptoms persist consult your doctor or emergency department.
  • Dispose of all resins as per your council regulations for hazardous material.
  * To be used as a guide only, ambient temperature and resin temperature will effect geltime and curing properties. The end user must test material before any application to ensure correct compatibility of the resin.